It is currently Thu Mar 28, 2024 12:01 pm

All times are UTC - 4 hours




Post new topic Reply to topic  [ 112 posts ]  Go to page 1, 2, 3, 4, 5 ... 8  Next
Author Message
 Post subject: ZL1 Camaro build
PostPosted: Mon Dec 28, 2009 11:48 am 
Offline

Joined: Wed Jul 30, 2008 11:21 pm
Posts: 242
Hi the zl1 camaro "clone" build is getting closer to completion. I have wanted to post pictures on here for a long time so here goes. Its been nearly 3 years and i have a ton of pictures and will do my best to put in some kind of order.
I originally purchased this car with plans to do some work and flip it. I figured if i made a few grand of this one then i could put that toward my 69 i have owned since 1988. Well i was really wanting to build a purpose made car for this type of racing and decided to keep it. I should of run but now its nearly done!
The car started as a supposed plain jane "rust free california car" well the car had some rust but damage everywhere. Granny drove by the brail method!
I hope to have car completed and on the track by this april. Every time i turn around there is another obstacle either with the car or my personal life so hopefully i can reach this goal!

Ryan


Attachments:
278.jpg
278.jpg [ 60.34 KiB | Viewed 10999 times ]
277.jpg
277.jpg [ 77.39 KiB | Viewed 10981 times ]
File comment: Camaro as it was in california.
276.jpg
276.jpg [ 53.56 KiB | Viewed 10970 times ]


Last edited by ssscamaro on Mon Dec 28, 2009 8:29 pm, edited 3 times in total.
Top
 Profile Send private message  
 
 Post subject: Re: ZL1 Camaro build
PostPosted: Mon Dec 28, 2009 11:54 am 
Offline

Joined: Wed Jul 30, 2008 11:21 pm
Posts: 242
March 07 it arrives in my driveway. The floors looked pretty good as did most of body at first. I already new about problem with right rear quarter but that was about it.


Attachments:
cacamaronexttoshed.jpg
cacamaronexttoshed.jpg [ 43.69 KiB | Viewed 11021 times ]
295.jpg
295.jpg [ 60.77 KiB | Viewed 10947 times ]
292.jpg
292.jpg [ 58.52 KiB | Viewed 10916 times ]
Top
 Profile Send private message  
 
 Post subject: Re: ZL1 Camaro build
PostPosted: Mon Dec 28, 2009 11:56 am 
Offline

Joined: Wed Jul 30, 2008 11:21 pm
Posts: 242
quarter and floors


Attachments:
294.jpg
294.jpg [ 47.83 KiB | Viewed 10911 times ]
293.jpg
293.jpg [ 50.05 KiB | Viewed 10919 times ]
Top
 Profile Send private message  
 
 Post subject: Re: ZL1 Camaro build
PostPosted: Mon Dec 28, 2009 12:01 pm 
Offline

Joined: Wed Jul 30, 2008 11:21 pm
Posts: 242
After looking over i found what i feared...rust dents and terrible body work! This is not good...


Attachments:
1569.jpg
1569.jpg [ 74.72 KiB | Viewed 10905 times ]
1564.jpg
1564.jpg [ 85.47 KiB | Viewed 10891 times ]
1563.jpg
1563.jpg [ 110.92 KiB | Viewed 10902 times ]
Top
 Profile Send private message  
 
 Post subject: Re: ZL1 Camaro build
PostPosted: Mon Dec 28, 2009 12:02 pm 
Offline

Joined: Wed Jul 30, 2008 11:21 pm
Posts: 242
more disgust


Attachments:
1575.jpg
1575.jpg [ 58.35 KiB | Viewed 10881 times ]
1574.jpg
1574.jpg [ 69.38 KiB | Viewed 10869 times ]
1572.jpg
1572.jpg [ 39.06 KiB | Viewed 10828 times ]
Top
 Profile Send private message  
 
 Post subject: Re: ZL1 Camaro build
PostPosted: Mon Dec 28, 2009 12:07 pm 
Offline

Joined: Wed Jul 30, 2008 11:21 pm
Posts: 242
off for media blasting and epoxy primer.


Attachments:
1599.jpg
1599.jpg [ 58.3 KiB | Viewed 10879 times ]
1598.jpg
1598.jpg [ 49.36 KiB | Viewed 10864 times ]
1596.jpg
1596.jpg [ 69.9 KiB | Viewed 10845 times ]
Top
 Profile Send private message  
 
 Post subject: Re: ZL1 Camaro build
PostPosted: Mon Dec 28, 2009 12:09 pm 
Offline

Joined: Wed Jul 30, 2008 11:21 pm
Posts: 242
it only gets better!


Attachments:
1630.jpg
1630.jpg [ 70.75 KiB | Viewed 10830 times ]
1621.jpg
1621.jpg [ 48.78 KiB | Viewed 10797 times ]
1606.jpg
1606.jpg [ 95.24 KiB | Viewed 10795 times ]
Top
 Profile Send private message  
 
 Post subject: Re: ZL1 Camaro build
PostPosted: Mon Dec 28, 2009 12:15 pm 
Offline

Joined: Wed Jul 30, 2008 11:21 pm
Posts: 242
In looking back, i should of bailed! I have another 69 camaro, an original ss396 car that i should of restored instead! I just didnt want to make a "clone" out of a "real" car! I still should of cut my losses.
At this point in the first picture i already had new fenders fitted to front of car.
The car had been rear ended at some point so decision was made to replace the entire trunk floor and the frame rails!! Along with rear valance quarters etc..
Ryan


Attachments:
714.jpg
714.jpg [ 97.88 KiB | Viewed 10807 times ]
droppingoff69bodyshop07.jpg
droppingoff69bodyshop07.jpg [ 50.36 KiB | Viewed 10823 times ]
IMG_0261.jpg
IMG_0261.jpg [ 80.86 KiB | Viewed 10810 times ]
Top
 Profile Send private message  
 
 Post subject: Re: ZL1 Camaro build
PostPosted: Mon Dec 28, 2009 12:26 pm 
Offline

Joined: Wed Jul 30, 2008 11:21 pm
Posts: 242
more progress


Attachments:
091.jpg
091.jpg [ 79.32 KiB | Viewed 10808 times ]
064.jpg
064.jpg [ 72.26 KiB | Viewed 10762 times ]
IMG_0264.jpg
IMG_0264.jpg [ 83.7 KiB | Viewed 10773 times ]
Top
 Profile Send private message  
 
 Post subject: Re: ZL1 Camaro build
PostPosted: Mon Dec 28, 2009 12:33 pm 
Offline

Joined: Wed Jul 30, 2008 11:21 pm
Posts: 242
new dash new frame rails new driverside floor pan which had very slight rust holes.


Attachments:
052.jpg
052.jpg [ 90.42 KiB | Viewed 10759 times ]
093.jpg
093.jpg [ 74.19 KiB | Viewed 10769 times ]
094.jpg
094.jpg [ 85.67 KiB | Viewed 10753 times ]


Last edited by ssscamaro on Mon Dec 28, 2009 12:46 pm, edited 1 time in total.
Top
 Profile Send private message  
 
 Post subject: Re: ZL1 Camaro build
PostPosted: Mon Dec 28, 2009 12:36 pm 
Offline

Joined: Wed Jul 30, 2008 11:21 pm
Posts: 242
Time for fitting and block sanding.


Attachments:
032.jpg
032.jpg [ 73.8 KiB | Viewed 10730 times ]
027.jpg
027.jpg [ 70.4 KiB | Viewed 10754 times ]
69restorearpanel.jpg
69restorearpanel.jpg [ 49.3 KiB | Viewed 10728 times ]
Top
 Profile Send private message  
 
 Post subject: Re: ZL1 Camaro build
PostPosted: Mon Dec 28, 2009 12:41 pm 
Offline

Joined: Wed Jul 30, 2008 11:21 pm
Posts: 242
not shown are the weld in frame connectors.
This body shop was great to deal with! Johns Collision and restoration, in south hadley mass.


Attachments:
791.jpg
791.jpg [ 59.21 KiB | Viewed 10703 times ]
790.jpg
790.jpg [ 49.47 KiB | Viewed 10732 times ]
034.jpg
034.jpg [ 72.53 KiB | Viewed 10697 times ]
Top
 Profile Send private message  
 
 Post subject: Re: ZL1 Camaro build
PostPosted: Mon Dec 28, 2009 12:54 pm 
Offline

Joined: Wed Jul 30, 2008 11:21 pm
Posts: 242
PAINT!!!
I really like yellow 69 camaros...but i wanted a white interior! I was going to go cortez silver until the night before and had them mix code 71 Lemans Blue!
This is the owner of Johns Collision, John putting the paint on in his booth in South Hadley. He does collision in the south hadley location and his restorations in another loaction. He loves chevrolets but also has a bunch of mopars that he is redoing. Did a nice mach 1 mustang not long ago as well.


Attachments:
003 (2).jpg
003 (2).jpg [ 31.48 KiB | Viewed 10676 times ]
011 (2).jpg
011 (2).jpg [ 60 KiB | Viewed 10689 times ]
009 (2).jpg
009 (2).jpg [ 41.67 KiB | Viewed 10671 times ]
Top
 Profile Send private message  
 
 Post subject: Re: ZL1 Camaro build
PostPosted: Mon Dec 28, 2009 1:00 pm 
Offline

Joined: Wed Jul 30, 2008 11:21 pm
Posts: 242
HOME!!!


Attachments:
006.jpg
006.jpg [ 50.03 KiB | Viewed 10650 times ]
005.jpg
005.jpg [ 75.04 KiB | Viewed 10668 times ]
001.jpg
001.jpg [ 84.57 KiB | Viewed 10678 times ]
Top
 Profile Send private message  
 
 Post subject: Re: ZL1 Camaro build
PostPosted: Mon Dec 28, 2009 1:16 pm 
Offline

Joined: Wed Jul 30, 2008 11:21 pm
Posts: 242
I put stock brakes on the front. The wildwood brakes take off about 35 pounds but i wanted this car to look really stock! I can always change later if i decide too...


Attachments:
004 (2).jpg
004 (2).jpg [ 85.48 KiB | Viewed 10640 times ]
005 (3).jpg
005 (3).jpg [ 79.58 KiB | Viewed 10624 times ]
001 (2).jpg
001 (2).jpg [ 62.55 KiB | Viewed 10648 times ]
Top
 Profile Send private message  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 112 posts ]  Go to page 1, 2, 3, 4, 5 ... 8  Next

All times are UTC - 4 hours


Who is online

Users browsing this forum: No registered users and 192 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group