62 Corvette Pure Stock Build

cowbay · **Posted:** Mon Dec 16, 2013 8:14 am

Keep the posts coming. exciting stuff :rock

NAPA 68 · **Joined:** Sun Sep 08, 2013 3:03 pm **Posts:** 15

A little bit of progress to report. I cleaned up the exhaust manifolds.

See Ma...........stock inside!

I received some other parts.........

Started to eye up the electronic conversion for the F.I. distributor

Merry Christmas everyone!

NAPA 68 · **Joined:** Sun Sep 08, 2013 3:03 pm **Posts:** 15

Workin workin workin

Crane pick up with rev limiter.

Installed the oil line tee to feed the distributor

Stock intake ports on the 461X heads

Yes, the rocker arms are going away per rules

Where it ended for the day.

NAPA 68 · **Joined:** Sun Sep 08, 2013 3:03 pm **Posts:** 15

Scored a great deal from a friend. Used Dutchman axles from his 60 Corvette vintage race car (went to a Ford 9") Very stout compared to the originals.

Bill C · **Posted:** Sat Jan 11, 2014 1:58 pm

OldInjun · **Joined:** Fri Sep 25, 2009 9:30 pm **Posts:** 71

Very nice! Love the black/red combo.

Perhaps we can go head-to-head some day?

Jack

old fart racing · **Joined:** Thu Sep 04, 2008 3:57 pm **Posts:** 849

Inquiring mind wants to know.

1. What is the ID on the collector end of your exhaust manifolds?

2. How do those roller rockers fit under the stock valve covers? What brand are they? :shrug

AdamR · **Posted:** Wed Mar 05, 2014 9:32 pm

Are those roller rockers legal on a pure stock build ?

NAPA 68 · **Joined:** Sun Sep 08, 2013 3:03 pm **Posts:** 15

old fart racing wrote:

Inquiring mind wants to know.

1. What is the ID on the collector end of your exhaust manifolds?

2. How do those roller rockers fit under the stock valve covers? What brand are they? :shrug

The I.D. is 2 1/2. The rockers are Cranes. I use a 1/2" gaket to clear them. Of course, they are going away

62 Corvette Pure Stock Build

Who is online