http://www.supercarraces.com/phpBB3/ |
|
ITS BACK.........ZL1 http://www.supercarraces.com/phpBB3/viewtopic.php?f=5&t=945 |
Page 1 of 2 |
Author: | ssscamaro [ Sat Aug 20, 2011 9:30 am ] | ||
Post subject: | ITS BACK.........ZL1 | ||
Hopefully to stay !!!! Going in today... Ryan
|
Author: | RalphsRapidTransit [ Sat Aug 20, 2011 10:42 am ] |
Post subject: | Re: ITS BACK.........ZL1 |
Excellent . See you Saturday at LVD |
Author: | Mike Derasmo [ Sat Aug 20, 2011 11:42 am ] |
Post subject: | Re: ITS BACK.........ZL1 |
Hey Ryan, hope to see you at the valley!!! |
Author: | Ted Daros [ Sat Aug 20, 2011 12:04 pm ] |
Post subject: | Re: ITS BACK.........ZL1 |
I like the valley pan, ...purchased, or fabricated at home? |
Author: | ssscamaro [ Sat Aug 20, 2011 7:29 pm ] |
Post subject: | Re: ITS BACK.........ZL1 |
Ted, stock gm from l88 and zl1. Chevy performance parts listted it up until a few years ago. I think there discontinued. This one is a repo i purchased from Heartbeat City. If i recall the originals from Gm perf parts came painted black.. Motor is in now to hook everything up..... |
Author: | Mike Derasmo [ Sat Aug 20, 2011 8:37 pm ] |
Post subject: | Re: ITS BACK.........ZL1 |
good deal!!!!! saturday??????? |
Author: | Ted Daros [ Sat Aug 20, 2011 10:20 pm ] |
Post subject: | Re: ITS BACK.........ZL1 |
Check and double check! |
Author: | MFChassisworks [ Sat Aug 20, 2011 11:14 pm ] |
Post subject: | Re: ITS BACK.........ZL1 |
Awesome Ryan! Look out fellas, you guys are going to be in trouble! |
Author: | RalphsRapidTransit [ Sat Aug 20, 2011 11:58 pm ] |
Post subject: | Re: ITS BACK.........ZL1 |
MFChassisworks wrote: Awesome Ryan! Look out fellas, you guys are going to be in trouble! See you Saturday Ryan. |
Author: | ssscamaro [ Sun Aug 21, 2011 1:38 am ] |
Post subject: | Re: ITS BACK.........ZL1 |
80% together... a little problem... stripped out 2 holes on pass side cylinder head exhaust manifold !!!!!!!!!!!!! I was so close to heli coiling them all...but seeing they were nos ...well nearly nos...i didnt...darn things stared at me all year!! i even had purchased extra inserts to do it.!! Drive side is on and tight ...pass side felt weak in more than the 2 that stripped(#6) but hopefully will be ok for round 2.......i can get to # 6 in car but need a short 25/64 bit and 90 Degree drill...i could get to 8 and maybe 2 but 4 motor would need to come back out...or up at least.. off to sears and home depot in AM any idea wher i can get the short bit on short notice??? Ryan By the way ...remember the first set of heads from WAY back??? well guess what....i put inserts in alll the threads intake and exhaust on that set !!!!!!!!!!!!!!!!!!!!!! DOH !!! |
Author: | kenv [ Sun Aug 21, 2011 6:38 pm ] |
Post subject: | Re: ITS BACK.........ZL1 |
MSC will have that drill bit Ken |
Author: | ssscamaro [ Sun Aug 21, 2011 7:11 pm ] |
Post subject: | Re: ITS BACK.........ZL1 |
ken we think alike...i googled them at 2am this morning....MSC store a few miles away... Ryan ps you running your car at all rest of year? |
Author: | kenv [ Sun Aug 21, 2011 8:10 pm ] |
Post subject: | Re: ITS BACK.........ZL1 |
Ryan, I hope to be racing in a few weeks and looking forward to seeing your ZL1 . Ken |
Author: | CJP_69 [ Mon Aug 22, 2011 9:38 am ] |
Post subject: | Re: ITS BACK.........ZL1 |
Good luck Ryan. Can't wait to see it run. |
Author: | ssscamaro [ Wed Aug 24, 2011 11:57 pm ] |
Post subject: | Re: ITS BACK.........ZL1 |
Manifold is on! Fixed! Spent way to long staring at which starter bolts to use....still didnt decide. Im to anal...i dont like the way they engage the block and each starter i have takes differnt bolts... should be all together late friday. Depending on weather should get running this weekend. |
Page 1 of 2 | All times are UTC - 4 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |