http://www.supercarraces.com/phpBB3/ |
|
Steve’s 1970 AAR Cuda build 340+6BBL 4 Spd. http://www.supercarraces.com/phpBB3/viewtopic.php?f=5&t=1434 |
Page 5 of 7 |
Author: | Mike Derasmo [ Mon Feb 09, 2015 12:13 pm ] |
Post subject: | Re: Steve’s 1970 AAR Cuda build 340+6BBL 4 Spd. |
If its an AAR, shouldn't it have E-60 in the front and G-60 in the rear, or are you keeping the same size tire all around? |
Author: | RalphsRapidTransit [ Mon Feb 09, 2015 2:06 pm ] | ||
Post subject: | Re: Steve’s 1970 AAR Cuda build 340+6BBL 4 Spd. | ||
Mike Derasmo wrote: If its an AAR, shouldn't it have E-60 in the front and G-60 in the rear, or are you keeping the same size tire all around? AAR's did come with staggered tire sizes. We are going to Run F-60x15 up front and G-60X15 in the rear. I would of loved to pickup E-60X15 but two of them are the price of all four of what we purchased.
|
Author: | RalphsRapidTransit [ Sat Feb 21, 2015 11:57 am ] | |||
Post subject: | Re: Steve’s 1970 AAR Cuda build 340+6BBL 4 Spd. | |||
Macy and I installed the Fuel Tank the other night.
|
Author: | RalphsRapidTransit [ Sat Feb 21, 2015 11:59 am ] | ||||
Post subject: | Re: Steve’s 1970 AAR Cuda build 340+6BBL 4 Spd. | ||||
Work on restoring and refinishing the drivetrain components in underway.
|
Author: | RalphsRapidTransit [ Sat Feb 21, 2015 12:02 pm ] | ||
Post subject: | Re: Steve’s 1970 AAR Cuda build 340+6BBL 4 Spd. | ||
SuperCar friend Jacks Auto Parts supplied the reproduction restoration parts needed to complete the AAR. Thank you to Jim and Gail for your continued service in the restoration business . If your looking for the right Mopar Restoration part call them. Make sure to let them know SuperCars sent you.
|
Author: | RalphsRapidTransit [ Mon Feb 23, 2015 11:17 am ] | ||||
Post subject: | Re: Steve’s 1970 AAR Cuda build 340+6BBL 4 Spd. | ||||
The Interior is DONE!
|
Author: | RalphsRapidTransit [ Mon Feb 23, 2015 11:18 am ] | ||||
Post subject: | Re: Steve’s 1970 AAR Cuda build 340+6BBL 4 Spd. | ||||
|
Author: | RalphsRapidTransit [ Mon Feb 23, 2015 11:19 am ] | ||||
Post subject: | Re: Steve’s 1970 AAR Cuda build 340+6BBL 4 Spd. | ||||
|
Author: | RalphsRapidTransit [ Mon Feb 23, 2015 11:21 am ] | ||||
Post subject: | Re: Steve’s 1970 AAR Cuda build 340+6BBL 4 Spd. | ||||
Heater and Radio delete plates frabricated and installed.
|
Author: | RalphsRapidTransit [ Mon Feb 23, 2015 11:21 am ] | ||
Post subject: | Re: Steve’s 1970 AAR Cuda build 340+6BBL 4 Spd. | ||
|
Author: | RalphsRapidTransit [ Mon Feb 23, 2015 11:24 am ] | ||||
Post subject: | Re: Steve’s 1970 AAR Cuda build 340+6BBL 4 Spd. | ||||
Tonight finish up the the rear trim and drill the front fenders to install the chin spoilers.
|
Author: | furrystump [ Mon Feb 23, 2015 12:38 pm ] |
Post subject: | Re: Steve’s 1970 AAR Cuda build 340+6BBL 4 Spd. |
So waiting on the motor? Transmission done? car is beautiful! |
Author: | RalphsRapidTransit [ Mon Feb 23, 2015 1:50 pm ] |
Post subject: | Re: Steve’s 1970 AAR Cuda build 340+6BBL 4 Spd. |
Rear, Drive shaft and Tranny are done and ready to go. Clutch, Exhaust and Motor are in the works. Will be done in the next four weeks. |
Author: | Ted Daros [ Mon Feb 23, 2015 11:08 pm ] |
Post subject: | Re: Steve’s 1970 AAR Cuda build 340+6BBL 4 Spd. |
Amazing! Looking so nice! Steve must be pumped to get it out |
Author: | RalphsRapidTransit [ Fri Mar 06, 2015 10:36 am ] | ||||
Post subject: | Re: Steve’s 1970 AAR Cuda build 340+6BBL 4 Spd. | ||||
The "Go Fast Parts" continue to come in. This week the Exhaust Manifolds have arrived from Central Connecticut Coatings. They have been treated to a complete polish of the exhaust runners along with the High Temp coating to the inside. Followed by a Cast Iron Coating to the outer surface of the manifolds. Scott the owners son gave us a complete tour of the process.
|
Page 5 of 7 | All times are UTC - 4 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |