http://www.supercarraces.com/phpBB3/ |
|
| Something new at the Bowtie Skunkworks http://www.supercarraces.com/phpBB3/viewtopic.php?f=5&t=1352 |
Page 11 of 12 |
| Author: | furrystump [ Mon Sep 19, 2016 7:44 am ] |
| Post subject: | Re: Something new at the Bowtie Skunkworks |
old fart racing wrote: It's as big as you can make a small block Chevy motor.  Ran into a little setback today. I have to get the intake milled as the block was decked.  Well that's not big enough to beat the super fish!  
|
|
| Author: | old fart racing [ Mon Sep 19, 2016 6:31 pm ] |
| Post subject: | Re: Something new at the Bowtie Skunkworks |
Rhett, he who likes to run his mouth should keep his foot clean. 
|
|
| Author: | RalphsRapidTransit [ Mon Sep 19, 2016 7:12 pm ] |
| Post subject: | Re: Something new at the Bowtie Skunkworks |
old fart racing wrote: Rhett, he who likes to run his mouth should keep his foot clean. Said the fortune cookie from last nights dinner
|
|
| Author: | furrystump [ Tue Sep 20, 2016 10:15 am ] |
| Post subject: | Re: Something new at the Bowtie Skunkworks |
old fart racing wrote: Rhett, he who likes to run his mouth should keep his foot clean. I glad to see you are gainfully employed again! I'm just surprised you know how to make fortune cookies!
|
|
| Author: | 1972LS5Chevelle [ Wed Sep 21, 2016 9:31 pm ] |
| Post subject: | Re: Something new at the Bowtie Skunkworks |
old fart racing wrote: It's as big as you can make a small block Chevy motor. Ran into a little setback today. I have to get the intake milled as the block was decked. I am going to guess around 434-ish ci? |
|
| Author: | old fart racing [ Thu Sep 22, 2016 6:42 am ] |
| Post subject: | Re: Something new at the Bowtie Skunkworks |
It is actually 421 cu. in. with 13.98 to one compression. We will see what happens. 
|
|
| Author: | 1972LS5Chevelle [ Thu Sep 22, 2016 8:10 am ] |
| Post subject: | Re: Something new at the Bowtie Skunkworks |
Yowza... I will be watching to see how that works. I am wanting to build either a 383 or 396 SBC for my Malibu. |
|
| Author: | furrystump [ Fri Sep 23, 2016 12:46 pm ] | ||
| Post subject: | Re: Something new at the Bowtie Skunkworks | ||
Always a favorite!
|
|||
| Author: | old fart racing [ Sat Sep 24, 2016 5:46 pm ] |
| Post subject: | Re: Something new at the Bowtie Skunkworks |
furrystump wrote: Always a favorite! Your Smurf eating days are over. Wait a minute, actually your Smurf eating days never were.
|
|
| Author: | 1510489 [ Sat Sep 24, 2016 7:21 pm ] |
| Post subject: | Re: Something new at the Bowtie Skunkworks |
I think you gut him stuttering 
|
|
| Author: | old fart racing [ Tue Sep 27, 2016 10:53 pm ] |
| Post subject: | Re: Something new at the Bowtie Skunkworks |
Happy now Ralph? 
|
|
| Author: | RalphsRapidTransit [ Wed Sep 28, 2016 9:12 am ] |
| Post subject: | Re: Something new at the Bowtie Skunkworks |
50% happier. Fix the license plate area next and I'll be 100% happy. |
|
| Author: | old fart racing [ Tue Mar 07, 2017 7:41 pm ] |
| Post subject: | Re: Something new at the Bowtie Skunkworks |
Almost ready for 2017. Rear axle seal leak repaired. Loose shifter linkage repaired. New Competition Engineering shocks installed. 1.6 ratio rocker arms to be installed on exhaust side. Seat belts sent out for recertification. New helmet on order. Oil to be changed. Cuda kill stickers printed. 
|
|
| Author: | furrystump [ Wed Mar 08, 2017 1:00 pm ] |
| Post subject: | Re: Something new at the Bowtie Skunkworks |
Not sure to who you would be referring to! My car is a '68 and they didn't make a cuda until '69! That would be like someone saying "nice nova!"
|
|
| Author: | old fart racing [ Wed Mar 08, 2017 6:08 pm ] |
| Post subject: | Re: Something new at the Bowtie Skunkworks |
So your telling me I need two different sets?
|
|
| Page 11 of 12 | All times are UTC - 4 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|