Did you try Kelsey tire or Coker ?

G70x14 Good Years are In Stock!

Bill call Summitt and get a real ship date. Let them know about the Ebay add. Summitt has the best price on coker tires. Even with our account we can't buy them cheaper.

Had to go to Meridan today to pick up supplies for work so I figured I'd go look foe Peraults radiator shop. I wrote down the address before I left and headed to my store. Turns out Puraults was 2 doors over. Talked to the owner, he remember Bills Fury radiator, he looked at what I had and said it's an 1 1/4 core and it should've been a two inch. So anyways the core will be in on Wednesday, I'll pull my rad out on Monday night, drop it off Tuesday and get it back before the weekend.
So close to getting out there and playing. The car is such a dream to drive, I take it everywhere. Just a couple of things to get to a point where I feel 100% sure it'll go where I need ti to go then I can start working on the tow rig.

Bill

Drove out to Hals place this morning. He generously offered to loan me some "traveling" tires. All the way out there 1 1/2 hours with some sightseeing along the way, the car was fine. Pulling onto Hals street and a rubbing/grinding noise come from the front of the car. We drove the last mile to his house quietly until turning into his driveway
Where it got bad again. Turns out it wasn't a wheel bearing like I thought but just a break shoe retaining rod got loose from its sping. I think my car just didn't cotton too well with all that Chevyness.

Bill

At least your timing for going to Hal's worked out great for you with Rosario there. He is a former Holley Dodge mechanic and he is a great mechanic and a great guy.

Glad it was something minor and very glad that you have some safe traveling rubber.

It was perfect. They wouldn't even let me do the work! Great guys.

See you tomorrow Bill:)

Bill

Well, when I got home today I found two of my new tires on my front porch. The G70 firestone don't seem any wider than my F70 goodyears. All I can do is wait till they're mounted and inflated and check again.



Bill

And here is where I have come

Bill

Congrats!!!

A big congrats Bill! It was an honor being next to you on your first pass back!!

- -And now we begin the quest for




Clutch fan replace solid 7 blade.



Sway bar removal.



Bill

Wow that fan is close!

Not sure I would run that fan that close with the engine torque moving the engine. Hope you have tough motor mounts.

Well, now that the Road Runner is out I think its time to get rid of 345HEMI as my forum name.A couple i thought of were, atomicWEDGEe and ACMErocketSled or birdSTROKEdamage. If you like one or have an idea lay it on me.
See ya at the races

bill