It is currently Thu Mar 28, 2024 6:33 pm

All times are UTC - 4 hours




Post new topic Reply to topic  [ 25 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Drag Race Suspensions
PostPosted: Mon Dec 05, 2011 9:04 pm 
Offline

Joined: Fri Jul 25, 2008 6:12 pm
Posts: 2617
Location: North Salem NY
Alot of guys will use the adjustables, and set pinion angle, then run the car to check if further changes are needed!
Once set, you weld and redrill uppers to the needed dimension!

Andrew, correct me if i am wrong once desired pinion angle is found, it would be left alone right?

_________________
69 Nova SS 396 L89
10.481
1.61 60’
132.34 mph


Top
 Profile Send private message  
 
 Post subject: Re: Drag Race Suspensions
PostPosted: Tue Dec 06, 2011 1:58 pm 
Offline

Joined: Thu Oct 21, 2010 10:11 pm
Posts: 29
Location: Albany, NY
Ted Daros wrote:
Alot of guys will use the adjustables, and set pinion angle, then run the car to check if further changes are needed!
Once set, you weld and redrill uppers to the needed dimension!

Andrew, correct me if i am wrong once desired pinion angle is found, it would be left alone right?



Ted, that is typically the case. Set the pinion angle with the drivers side upper and then attach the passenger side. If you change anything in the driveline, including the motor it should be re-checked. It could be tough to get it excatly where the adjustable arm was, but not impossible I guess.

is allowing adjustable uppers a possibility?


Top
 Profile Send private message  
 
 Post subject: Re: Drag Race Suspensions
PostPosted: Tue Dec 06, 2011 4:35 pm 
Offline

Joined: Fri Jul 25, 2008 6:12 pm
Posts: 2617
Location: North Salem NY
Not for certification!
If you come to a few races and have them, it wont be a problem if you are making an effort to get the car correct! But after a while its gotta be right!

Kinda like headers for a first time guy!

I usually go to tnt night etc. to try things out, and it gives me extra seat time to! :aok

_________________
69 Nova SS 396 L89
10.481
1.61 60’
132.34 mph


Top
 Profile Send private message  
 
 Post subject: Re: Drag Race Suspensions
PostPosted: Tue Dec 06, 2011 4:37 pm 
Offline

Joined: Fri Jul 25, 2008 6:12 pm
Posts: 2617
Location: North Salem NY
Getting things right is very rewarding!!! :winner

People do check out your car in the pits, and its fun to hear the comments!

_________________
69 Nova SS 396 L89
10.481
1.61 60’
132.34 mph


Top
 Profile Send private message  
 
 Post subject: Re: Drag Race Suspensions
PostPosted: Tue Dec 06, 2011 9:42 pm 
Offline

Joined: Sat Sep 12, 2009 10:36 am
Posts: 153
Attachment:
011.JPG
011.JPG [ 80.04 KiB | Viewed 3882 times ]

This is a pic. of my trans. mount after Atco.I always do a visual inspection after every race except i did not after Etown.It almost cost me big time.I put the engine in the day before Etown and forgot to tighten the 2 mount bolts and as you can see one is missing and the other one was hanging as you see it with 3 turns before it fell out. :shock:


Top
 Profile Send private message  
 
 Post subject: Re: Drag Race Suspensions
PostPosted: Tue Dec 06, 2011 10:46 pm 
Offline

Joined: Fri Jul 25, 2008 6:12 pm
Posts: 2617
Location: North Salem NY
:sick
Fortunatly you were running brand new tires, if that hooked forgetaboutit!!

_________________
69 Nova SS 396 L89
10.481
1.61 60’
132.34 mph


Top
 Profile Send private message  
 
 Post subject: Re: Drag Race Suspensions
PostPosted: Wed Dec 07, 2011 12:08 am 
Offline

Joined: Thu Oct 21, 2010 10:11 pm
Posts: 29
Location: Albany, NY
Ouch, that was a close one ! on that trans mount..

Thanks for the follow-up Ted....I have a few ideas up my sleeve...LOL


Top
 Profile Send private message  
 
 Post subject: Re: Drag Race Suspensions
PostPosted: Wed Dec 07, 2011 11:24 am 
Offline

Joined: Fri Jul 25, 2008 12:26 am
Posts: 7469
Location: Bristol CT
To touch on what Ted said :aok . You can run your combo with the group. If your Musclecar is more of a day 2 (Headers, Radial tires, Wrong carb, heads ETC.) Bring it out before you change anything, run with the group make sure you enjoy the class then talk to the tech guys and we will get you on the path to certification (no limit to how long it takes you to get there, as long as progress is being shown toward certification).

Very important- The only way you will not be allowed to compete is if your gunning for the Top Eliminator position (11.99 or quicker). In this case you need to be 100% correct and ready for certification no exceptions.

Many of our racers start as day 2 Musclcars they have run with the group for years and have made changes to get there Musclcars closer to certification. If your running mid pack (where all the fun is :hungry :winner :beer ) you will be mixed in with Certified cars and cars on the way to certification.

Don't wait to be 100% correct to enjoy the festivities :winner .

_________________
SUPERCAR LEGAL

66 Belvedere I HP2 Hemi Auto 11.13 @ 124MPH 1.68 60' S/A

70 RoadRunner 440+6 Auto 11.05 @ 125MPH 1.67 60' S/A

70 AAR Cuda 340+6BBL 4 Spd. 11.58 @ 121MPH 1.76 60' S/A

72 Demon GSS 340 S/A 11.76 @ 118MPH 1.89 60' S/A


Top
 Profile Send private message  
 
 Post subject: Re: Drag Race Suspensions
PostPosted: Wed Dec 07, 2011 3:19 pm 
Offline

Joined: Thu Oct 21, 2010 10:11 pm
Posts: 29
Location: Albany, NY
Thanks Ralph,

I really would like to thank everyone for their input and advice.

The car would likely be under 11.99 right off the bat, so I want to get everyhting as correct as possible. Won't be able to run until late summer as my son will be driving. He will get used to racing running a mostly stock '87 Buick Turbo T in the high 13's starting in the spring and then get acclimated to the Chevelle by the end of summer. By that time it should be 99% correct :cross: so that's why i am anxious to make my list of modifications he needs to work on with me supervising.

Should be real fun teaching him..

Look forward to the first race we can come watch too.

Tom


Top
 Profile Send private message  
 
 Post subject: Re: Drag Race Suspensions
PostPosted: Wed Dec 07, 2011 6:26 pm 
Offline
User avatar

Joined: Tue Sep 15, 2009 8:54 am
Posts: 315
Ted Daros wrote:
Alot of guys will use the adjustables, and set pinion angle, then run the car to check if further changes are needed!
Once set, you weld and redrill uppers to the needed dimension!

Andrew, correct me if i am wrong once desired pinion angle is found, it would be left alone right?



Generally these cars are set up with the pinion angle set for maximum traction and it is left as is. However,on a good track you can take a couple of degrees out.


Top
 Profile Send private message  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 25 posts ]  Go to page Previous  1, 2

All times are UTC - 4 hours


Who is online

Users browsing this forum: No registered users and 208 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group