http://www.supercarraces.com/phpBB3/

hide pressure regulator
http://www.supercarraces.com/phpBB3/viewtopic.php?f=4&t=623
Page 2 of 2

Author:  MFChassisworks [ Sun Apr 25, 2010 9:43 am ]
Post subject:  Re: hide pressure regulator

Actually you want the Fuel pressure regulator directly in front of the carburetor. Location is due to safety reasons as per the rulebook.

Author:  CJK440 [ Sun Apr 25, 2010 10:24 am ]
Post subject:  Re: hide pressure regulator

I don't have a rule book but I thought the rule talked about it being a certain distance from the flywheel.

If you don't have a pump yet, run a Mallory 110 and you don't have to worry about the reg. :wink:

Author:  furrystump [ Sun Apr 25, 2010 12:23 pm ]
Post subject:  Re: hide pressure regulator

I adjusted the mount I made to keep it from touching the floor and it's much quieter.

Attachments:
077.JPG
077.JPG [ 276.06 KiB | Viewed 1663 times ]

Author:  MFChassisworks [ Sun Apr 25, 2010 1:24 pm ]
Post subject:  Re: hide pressure regulator

Try to avoid 90deg fittings or swivel fittings.

The fuel line has to be on the outside of the frame rail when it passes by the flexplate/flywheel. Im not sure of the distance .

Fuel line are not supposed to be on the firewall.

Author:  furrystump [ Sun Apr 25, 2010 11:23 pm ]
Post subject:  Re: hide pressure regulator

The stock location for the fuel line places it on the inside of the unibody/frame rail, but protected by the 1.09" torsion bar. If it is outside the frame rail it will be in the wheel well.

Page 2 of 2 All times are UTC - 4 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/