http://www.supercarraces.com/phpBB3/ |
|
hide pressure regulator http://www.supercarraces.com/phpBB3/viewtopic.php?f=4&t=623 |
Page 2 of 2 |
Author: | MFChassisworks [ Sun Apr 25, 2010 9:43 am ] |
Post subject: | Re: hide pressure regulator |
Actually you want the Fuel pressure regulator directly in front of the carburetor. Location is due to safety reasons as per the rulebook. |
Author: | CJK440 [ Sun Apr 25, 2010 10:24 am ] |
Post subject: | Re: hide pressure regulator |
I don't have a rule book but I thought the rule talked about it being a certain distance from the flywheel. If you don't have a pump yet, run a Mallory 110 and you don't have to worry about the reg. |
Author: | furrystump [ Sun Apr 25, 2010 12:23 pm ] | ||
Post subject: | Re: hide pressure regulator | ||
I adjusted the mount I made to keep it from touching the floor and it's much quieter.
|
Author: | MFChassisworks [ Sun Apr 25, 2010 1:24 pm ] |
Post subject: | Re: hide pressure regulator |
Try to avoid 90deg fittings or swivel fittings. The fuel line has to be on the outside of the frame rail when it passes by the flexplate/flywheel. Im not sure of the distance . Fuel line are not supposed to be on the firewall. |
Author: | furrystump [ Sun Apr 25, 2010 11:23 pm ] |
Post subject: | Re: hide pressure regulator |
The stock location for the fuel line places it on the inside of the unibody/frame rail, but protected by the 1.09" torsion bar. If it is outside the frame rail it will be in the wheel well. |
Page 2 of 2 | All times are UTC - 4 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |